METHODICAL INSTRUCTION

 

for laboratory classes on discipline

“Chemistry of functional derivatives of organic molecules”

 

Laboratory work N 1

 

The qualitative reactions of alcohols and phenols.

 

Theoretical explanation.

 

Alcohols, phenols and ethers all may be regarded as derivatives of water. This is the reason they are being discussed together. Alcohols and phenols are derived from water by replacing one of its hydrogens by alkyl and aryl groups, respectively.

Thus, both alcohols and phenols have the hydroxyl (—OH) functional group which is responsible for most of their chemistry. In alcohols the hydroxyl group is attached to an aliphatic carbon atom, while in phenols the hydroxyl group is directly attached to an aromatic nucleus. Thus, alcohols and phenols may also be regarded as the hydroxy derivatives of aliphatic and aromatic hydrocarbons, respectively.

Ethers are derived from water by replacing both of its hydrogens by two alkyl, two aryl, or one alkyl and one aryl groups.

 

ALCOHOLS

 

Alcohols are substances having the hydroxyl group attached to an aliphatic carbon ?»tom. They may be classified according to the number of hydroxyl groups present in their molecules. An alcohol having only one hydroxyl group in its molecule is known as a monohydric alcohol, and the alcohols with two and three hydroxyl groups in their molecules are known as dihydric and trihydric alcohols, respectively. The alcohols having more than one hydroxyl group are generally called polyhydric alcohols. Alcohols, Phenols and Ethers

 

MONOHYDRIC ALCOHOLS

 

Monohydric alcohols are represented by a general formula CJl2n+1OH, and form a homologous series. They may be classified as primary, secondary, and tertiary alcohols depending on whether the hydroxyl group is attached to a primary, secondary, or tertiary alkyl group, respectively.

 

These structural differences lead to important differences in the chemical behaviours of the alcohols.

 

Nomenclature

There are two main systems of naming the alcohols: (i) the system of common names, and (ii) the IUPAC system.

The system of common names. The simpler alcohols are generally known by their common names. A common name consists of the name of the alkyl group to which the hydroxyl group is attached, followed by the word alcohol.

Preparation of Alcohols

The alcohols are the most important class of aliphatic compounds. They are extensively used as solvents and as laboratory reagents for the preparation of a host of other classes of organic compounds, through a variety of organic reactions. They are also important industrial materials. For such important starting materials it is necessary that they must to available in large quantities. Although many methods are available for the preparation of alcohols from many other classes of readily available compounds, only the more important preparations of representative nature are included here.

1. Hydration of alkenes. Alcohols can be easily prepared by the hydration of alkenes.

2. Reduction of carbonyl compounds. Alcohols can be easily prepared by the reduction of aldehydes and ketones either by hydrogenation in the presence of metal catalysts such as nickel, palladium or platinum, at temperatures ranging from room temperature to about 200°C, and moderate pressures (3 - 20 atm.), or by the use of chemical reducing agents such as lithium aluminium hydride (LiAlH4) or sodium borohydride (NaBH4). Aldehydes give primary alcohols while ketones yield secondary alcohols.

Catalytic hydrogenation is simple to accomplish and gives quantitative yields of the products.

 

Laboratory work.

The reaction with solution of the chloride of the zinc. To distinguish primary, secondary and tertiary alcohols, is used different mobility hydroxyl group in reactions alcohol with solution ZnCl2 in concentrated salt acid:

ROH + HCl ® RCl + H2O

The tertiary alcohols interacts with this reagent with top speed, giving indissoluble alkyl halides; the primary alcohols under long-lasting heating only or standing, secondary occupy the intermediate position.

The experience. Prepare the solution 1,6 ZnCl2 in 1 ml HCl, cool and do on three parts. To each part of the solution add on 3-4 dripped accordingly primary, secondary or tertiary alcohol, energetically joggle and leave in glass with water under 25-30°C. Reactions begin about judge on clouding of the solution in consequence of formation indissoluble alkyl halides. Note time of the clouding of the solution in each test tube.

Distinguish tertiary and secondary alcohols possible breakdown with concentrated HCl without ZnCl2. In these condition tertiary alcohols during 3-5 minutes, secondary - do not.

The oxidation by chrome mixture. To distinguish primary and secondary alcohols, possible use the oxidation their chrome mixture. The primary alcohols change in aldehydes herewith, secondary - in ketones. If received distillate reduce by the Fehling's solution, that carbonyl compounds presents itself aldehyde and alcohol was primary but if distillate does not restore the Fehling's solution, that carbonyl compounds is an ketones and alcohol was secondary:

 

3RCH2OH +K2Cr2O7 + 4H2SO4 → 3RCOH + K2SO4 + Cr2(SO4)2+ 7H2O

3RR¢CHOH +K2Cr2O7 + 4H2SO4 → 3R-CO- R¢+ K2SO4 + Cr2(SO4)2+ 7H2O

 

The Experience. During 5 mines boil with inverse refrigerator on 1 ml propanol and isopropanol with 10 ml solution of Bekmana. The reactionary mixture distils, collecting several milliliterses of distillate in receiver with solution 2,4-dinitrophenilhydrasin. The fallout setting indicates, on that oxidation passed and was formed carbonyl compounds. The other part of distillate collect in receiver with solution of Fehling. The separation red or wanted setting oxide (II) honeys when heating is indicative of that that formed carbonyl compounds is an aldehyde.

 

The qualitative reactions of phenols.

 

The reaction with FeCl3. For majority phenols and enols typical intensive colour reaction with chloride ferric (III), ROFeCl2 conditioned by forming. Usually appears violet or blue colouration, but for some substituted phenols she can be red or green.

In experience with enols colouration it turns out to be more bright if material dissolved not in water, but in alcohol or in the other organic solvent. The colour reaction phenols less distinctly in alcohol, particularly sensitive in chloroform.

The Experience 1. 2-3 place In test tube crystals of phenols and dissolve in 2-3 ml water, then add 1-2 dripped 3% of the solution FeCl3. Appears the typical violet colouration. The Experience repeats with salicylic acid.

The Experience 2. To 2-3 ml water flow 2 dripped the acetoacetic ester, then 2-3 dripped 3% of the solution FeCl3. To painted solution flow on drop brome water before disappearance of the colouration. Observe, as through some time colouration newly appears. The Experience also conduct with acticacetone.

The reaction with brome water. The phenols with free ortho- and para  decolorizes brome water and form at products of substitution , which usually fall out in sediment.

The Experience 3. Prepare on 1 ml water solution of the phenols, α- and β-naphthol and to each solution added on 1 ml brome water gradually. Observe occurring change

The Reaction with diazocompounds. The phenols match with diazocompounds, forming painted products. Usually for qualitative test is used diazotional sulphanil  acid.

The Experience 4. Several crystals of the phenols dissolve in 1,5 ml 15 % of the solution acerbic sodium inflict the glass ledge several drops of the solution on piece of the filter paper. Beside inflict several drops of the solution n-diazobenzosulpho asid so formed heel touched. On appearance of the colouration in place of the contiguity solution judge about presence phenyl groups.

For preparation n-diazobenzosulpho asid to solution 0,1 sulphanil acid in 5 ml water add when joggling 0,5 ml 10% of the solution of the nitrate sodium.

The reaction with alkali (the change from phenols from alcohol). The phenols open in diluted solution rare wax in consequence of formation dissolved in water phenolyates. The alcohols with alkali do not so indissoluble alcohols in water do not open and in alkali.

The Experience: In test tube place several crystals of the phenols and flow gradually when joggling 5 % solution NaOH before full their dissolutions. Simultaneously in the other test tube fill 0,2-0,3 ml butyl or amyl alcohols and add the alkali. Compare the got results.   

 

Exercises

 

1. The temperature of the boiling alcohol much above, than alkanes with approximately such relative molecular mass. This is conditioned presence in alcohol:

A) donor-acceptor linkage

B) sevenpolar linkage p

C) between molecular linkage

D) ion linkage

E) between molecular power of length.

2. When heating alkyl halides with water solution alkali are formed compounds:

A) alcohols

B) ketones

C) esters

D) ethers

D) aldehydes

3. The Reactions of carboxylic acids with alcohols in presence of concentrated a sulphuric acid are identified:

A) etherification

B) saponification (soap-making)

C) hydration

D) sulfuration

E) polycondensation

4. The phenols participates in reaction:

A) azocombination

B) aldol condensation

C) reaction of diazotion

D) hydrolysis

E) croton condensation.

5. Indicate carbolic acid:

A) phenols

B) propanol

C) methanol

D) ethanol

E) butanol

6. Alkoxides are products of the interaction of the following compounds:

A) alcohols with active metals

B) phenols with active metals

C) alcohols with hydrogen halogens

D) alcohols with carboxylic acids

E) phenols with solution of alkali

7. The alcohols, containing two or several hydroxyl groups:

A) polyhydric

B) amino alcohols

C) hydroxiacids

D) phenols

E) ocsoacids

8. The Product got at interaction ethanal with Grignard reagent:

A) primary alcohol

B) carboxylic acid

C) secondary alcohols

D) ketones

E) tertiary alcohols

9. Ketony possess the smaller reactionary ability to nucleophilic agent, than aldehydes. This is explained following characteristic alkyl groups.

A) electronaceptor characteristic

B) change electron density of simple linkage

C) enter in reaction substitution

D) reduction polarity carbonyl groups

E) electron donor characteristic.

10. Compounds with one or several hydroxyl groups, attached to benzene rink are identified:

A) phenols

B) hydroxiacids

C) alcohols

D) ocsoacids

E) enols

 

Laboratory work N 2

 

The qualitative reactions of carbonyl compounds.

 

Theoretical explanation.

 

Aldehydes and ketones are the compounds containing carbonyl group, C=O, in their molecules. They can be regarded as the derivatives of formaldehyde,^C = O, an aldehyde itself,  that  is  obtained  by  the oxidation  of methane. Formaldehyde is trie simplest carbonyl compound. If one of the two hydrogen atoms of formaldehyde is replaced by an alkyl or aryl group, another aldehyde is obtained. If both hydrogens are replaced by either alkyl or aryl groups, or one by each, a ketone is obtained.

Thus, aldehydes are represented by the general formula RCHO (in formaldehyde, R is H). The characteristic functional group of the aldehydes  is 0  — C—H which is known as a formyl group. The aldehyde function (the formyl group) always occurs at the end of a chain. The ketones are represented by the general formula RCOR,, where R and R' may be aliphatic or aromatic; they may be same or different. The characteristic functional group of ketones is — C—, which is comm­only known as the keto group. It always occurs inside a chain.

 

Nomenclature

Aldehydes. The common names. The names of the simple aldehydes are derived from the names of the corresponding carboxylic acids by replacing the suffix -ic (or -oic) acid by -aldehyde. For example,

The substituents are prefixed using the Greek letters, a-, β-, y-, 5-, etc., to indicate their positions in the chain, which begin from the carbon atom next to the carbonyl group.

The IUPAC names. In the IUPAC system the name of an aliphatic aldehyde is derived from the name of the parent alkane having the same number of carbon atoms, by replacing the ending -e of the name of the alkane with -al. Since the aldehyde group is always at the end of the chain, there is no need to indicate its position. However, the positions of the substituents (if any) are indicated by numbers starting from the aldehydic carbon (not from the next carbon as was done in the case of common names).

Ketones. The common names. The simple ketones are named by listing the names of the two groups attached to the carbonyl group separately in alphabetical order, followed by the word ketone. For symmetrical ketones the prefix di- is used. The positions of the substituents (if any) are indicated by the Greek letters, as in the case of aldehydes.

O

The simplest ketone, dimethyl ketone, is commonly known as acetone.

The ketones in which the carbonyl group is attached to a benzene ring, are also named as -phenone, as shown above in parentheses.

The IUPAC names. In the IUPAC system the names of the ketones are derived from the names of the corresponding alkanes by replacing the ending -e with -one. The position of the keto group is indicated by numbering the parent chain from one end so that the carbonyl group gets the lowest possible number (numbering is not necessary for propanone and butanone unless some substituent is present).

 

Preparation of Aldehydes and Ketones

 

Many aldehydes and ketones occur abundantly in nature and can be obtained from the natural sources, while others can be prepared synthetically. Numerous laboratory methods are available for the preparation of aldehydes and ketones. Some of these methods yield the aldehydes and ketones \vith the same number of carbon atoms as the starting materials, while some other involve the formation of new carbon-carbon bonds, and yield aldehydes and ketones with higher number of carbon atoms. The production of aldehydes and ketones on the commercial scale generally involve the same reactions as used in the laboratory, except that in some cases cheaper reagents, if available, are used. For example, for the commercial, preparation of aldehydes and ketones from alcohols, oxygen from air is used as an oxidizing agent instead of KMnO4 or K2Cr207 which are commonly used in the laboratory.

Only a few of the many laboratory methods available for the preparation of aldehydes and ketones are being given here, Most of them are of specific nature, and are used for the preparation of either aldehydes or ketones only, while the other are of general nature and can be used for the preparation of both aldehydes and ketones. Some of these methods have already been discussed at various places in this text.

 

Laboratory work N 2

 

The qualitative reactions of carbonyl compounds multiple and varied that is explained by aptitude êàðáîíèëüíûõ join to enter in different reactions of substation compounds. Aldehydes and êåtones behave in these reaction nearly equally.

1. The Reaction with hydrochloric acid of hydroxylamine. Compounds, containing carbonyl group, at interaction with hydrochloric acid of hydroxylamine select the free salt acid:

  

  

Ñ = O + H2NOH·HCl →  C = NOH + H2O + HCl

 

 

Change ðÍ ambiences possible to find on change the colouration of the indicator, for instance ìåòèëîâîãî orange.

The Experience. 2 ml 2% of the solution of hydrochloric acid of hydroxylamine fill in test tube, add 1 ml acetone, then several drops methyl orange. Compare the colouration of the solution in test tube with colouration methyl orange in 2% solution hydrochloric acid of hydroxylamine. The Experience repeat with methylethylketones and benzaldehyde.

2. The Reaction with hydrosulfites sodium. Aldehydes and aliphatic methylketones with hydrosulfites sodium with formation well crystal hydrosulfite compounds, which are a sodium-vapor salt -an ocsisulfoacid:

                                          

                                               OH

R – C = O + NaHSO3 ®  R – C – SO3Na

       H                                     H

                                            OH

R – C = O + NaHSO3 ®  R – C – SO3Na

       CH3                      CH3

The Experience. In test tube fill 1 ml acetone, add 1 ml saturated solution of hydrosulphite of sodium and mixed. Soon appear the colourless crystals an hydrosulphite derived. The Experience repeat with benzaldehyde.

3. The Reaction with [Ag(NH3)2]OH. All aldehydes restore the ammonium solution an oxide silver:

 AgNO3 + NH4OH ® AgOH + NH4NO3

 AgOH + 2NH4OH ® [Ag(NH3)2]OH

 

R – C = O + 2[Ag(NH3)2]OH ®  R – C = O + 2Ag + H2O + 3NH3

      H                                                         ONH4

 

 

The standing out metallic silver settles on wall of the test tube in the manner of mirrors. This reaction can also give some aromatic amines, polyhydric phenols and diketones.

The Experience. In carefully washing test tube 5 drops formalin add with 5 ml reagent and mixture carefully warm on water bath under 60-70°C. Standing out metallic silver settles on wall of the test tube in the manner of metallic mirror.

4. The Reaction with reagent of Fehling. Aldehydes fat row restore bivalent copper in one valent. As reagent, containing ions Cu2+, is used reagent of Fehling. The reagent of Fehling prepare before using, mixing two solutions: solution CuSO4 and alkaline solution of Segnet salts (potassium-sodium-vapor salt of the wine acid). At decantation solution is formed hydroxide honeys (II), which with Segnet salt gives complex joining the type glycolate honeys:

Aromatic aldehydes  this reaction do not give.

The experience. Prepare in test tube reagent of Fehling, merging on 1 ml source solution, and add 2 ml 1% of the solution of the glucose. The higher part of the contents of the test tube warm in flame of the burner before begin boilings and observe the appearance wanted or red setting oxide honeys (I). Parallel conduct the reaction with formalin and benzaldehyde, adding to 2 ml Fehling’s reagent (separately) on 2-3 dripped formalin and 1-2 dripped benzaldehyde. Observe occurring change. 

5. Iodoform test. This reaction give methylketones and material capable at oxidation to form acetyl groups ((ÑÍ3ÑÎ-):

 

3ÑH3CO-R + 3I2 + 4NaOH ® CHI3 + RCOONa + 3NaI + 3H2O

 

The Experience. In 1 ml water, containing 1 drop of the acetone, add first 2 dripped the concentrated solution I2 in KI and then on drop 10% solution NaOH. The Colouration iodine disappears and simultaneously stands out the ample sediment CHI3. Formation setting on chill for acetone characteristic of, for the other join is required endurance or heating reactionary mixture.

 

Exercises

1. At interact ion acetaldehyde with hydrogen cyanide  is got product:

A) a– hydroxinitril

B) b– hydroxinitril

C) acetic acid

D) ocsinitril

D) amino alcohols.

2. At interaction àldehydes with alcohol is formed:

A) acetal

B) hemiacetal

C) ethers

D) esters

E) amin alcohols

3. The Reaction disproportion of aldehydes in presence of alcohol solutions of alkali with formation of primary alcohol and carboxylic acids is called:

A) Kannicaro reaction

B) Tischenko reaction

C) aldol condensation

D) croton  condensation

E) Relen reaction

4. The hybrid condition of the atom of carbon in carbonyl group:

A) sp2

B) sp2d

C) sp

D) sp2d2

D) sp3

5. One of the industrial methods of the reception of aldehydes - an interaction alkenes with syntheses - gas is identified:

A) ocsosynthesis

B) Williamson syntheses

C) hydroxisynthesis

D) oxidation

E) condensation.

6. On Kucherov reactions under hydration hydrocarbon possible to get vinegaraldehyde.  What possible use the hydrocarbon?

A) acetylene 

B) butyne

C) ethylene

D) propyne

E) butylene

7. The General formula of aldehydes and ketones:

À) ÑnH2nO

B) ÑnH2n+1CO2H

C) ÑnH2n+2O

D) ÑnH2n+1OH

E) ÑnH2n+1NH2

8. Ketones oxidized only by strong oxidizing agents, for example, in presence of hot HNO3 and chrome acid are formed following compounds:

            ÑÍ3                 hot HNO3

                                Ñ = O                           …….

            C2H5

A) vinegar and propanoic acids

B) formic and acetic acid

C) acetone and acetic acid

D) acetaldehyde and acetic acid

E) acetaldehyde and propanoic acids

9. Aldehydes in presence of hydrogen chloride interact with alcohols, and are as a result formed following compounds:

 

ÑÍ3                                        dry HCl

                                Ñ = O + 2Ñ2Í5ÎÍ

               H

 

A) hemiacetals

B) carboxylic acids

C) acetals

D) esters

E) ethers

10. Ketones possess the smaller reactionary ability to nucleophilic agents, than aldehydes. This is explained following characteristic alkyl groups:

A) electronaceptor characteristic

B) change electron density of simple linkage

C) enter in reaction substitution

D) reduction polarity carbonyl groups

E) electron donor characteristic.

 

Laboratory work N 3

 

OXIDATION AND REDUCTION REACTIONS

 

General information. Reactions of the oxidation and reduction are an much occuring in stages process, mechanism which not unambiguous and depends on constructions of substrat, natures of îxiding agent or restorer, as well as from conditions of the undertaking reaction. In this section are considered reactions of the oxidation and reduction, bound with change only, contents in organic compounds the oxygen or multiple links.

Oxidation is widely used for obtaining carboxylic acids, aldehydes, ketones, à-oxides, hymen, N-oxides tertiary amines and row of the other classes of the organic compounds. There is big set oxiding agents, differing on oxiding potential, specificity of the action. As oxiding agents are widely used oxygen, permanganate of potassium, chrome anhydride, chrome mixture, nitric acid, lead dioxide, lead tetraacetate, dioxide selenium, hydrogen peroxide, ferric (III) chloride.

One and same organic join depending on natures îêèñëèòåëÿ can change in different join. So, for instance, at oxidation of the aniline õëîðíîâàòèñòîé by acid get ÿ-aminophenol, chrome acid - n-hymen. The Different products of the oxidation can be formed not only when change one oxidizing agents others, but also as a result of change the conditions, in which acts same oxidizing agents. If, for instance, oxidize the aniline permanganate of potassium in tart ambience, that occurs oxidizing polycondencation, bring about formation aniline black. But if oxidation of the aniline permanganate of potassium to conduct in neutral ambience, that product to reactions is an azobenzene, but in alkaline ambience - an nitrobenzene.

The reactions of the recovering the organic join are used for reception alcohol, amines, for elimination oxygen, for reduction multiple links and in row of the other events. As restorers are used alkaline metals in absolute alcohol or ammonia, tin in tart ambience, iron in neutral and acid solutions, zinc, aluminium in tart and alkaline ambience, lithium aluminium hydride (LiAlH4), lithium borohydride or sodium (LiBH4, NaBH4), salts Sn (II), Fe (II), Ti (III), sulphides and hydrosulphides (Na2S, KHS), dithionite the sodium (tetraoxidisulphate sodium, Na2S2O4), hydrazine (H2N - NH2) and row of the other join, is used as well as electrochemical reduction. Catalytic hydrogenation is discussed in section "Homogeneous and ãåòåðîãåííûé catalysis".

When undertaking ñòåõèîìåòðè÷åñêèõ calculation oxidation - reduction reaction of the organic compounds comfortable to use the formal belief about degree of the oxidation atom. Under degree of the oxidation of the atom imply the charge, which possessed atom if all his(its) êîâàëåíòíûå relationship with atom other element changed in ion. The Direction of the offset electronic pair(vapour)s covalent relationship is defined on the grounds of collations electro negativity of atom, participating in her(its) formation. Below row relative electro negativity is brought on Poling:

 

 

At determination degree oxidations relationship between atom one and same element in calculation do not be taken. The degree of the oxidation of the atom of carbon in organic compounds can take importance from +4 before -4, hydrogen from +1 before -1, oxygen -2 and -1. The amount of the degrees of the oxidation all atom in molecule is a zero. As example are brought importance degree oxidations atom in some organic compounds:

The calculation factor in oxidation-reduction reaction can be illustrated following example:

Laboratory work. Syntheses of benzoic  acid

 

 

The reagents: toluene 3 (0,033 moths); potassium permanganate 10,5 (0,066 moths); 36% salt acid (r=1,18) 4,5 ml.

The dishes and equipments the round bottom flask by capacity 250 ml; the refrigerator of  Lybih; the crater of Byuhner; the flask of Bunzen; the glass by capacity 25 ml.

In round bottom to flask, supplied by inverse refrigerator during 10 minutes boil 10,5 reduced permanganate of potassium in 100 ml water. Then through refrigerator 3,4 ml toluene add to solution oxidizing agent and continue to boil the mixture on sandy bath during 2-3 hours. If to moment of the completion to reactions solution is not decolorized, to he adds 1 ml alcohol or 0,2 gram oxalic acid. The inverse refrigerator change after discoloration of the solution on direct, drive away 50-60 ml water, cool the mixture before 50-60°Ñ, on crater Byuhner filtered dioxide of manganese and wash his(its) twice hot water (on 5 ml).

The received solution to potassium salt benzoic acids mix since 0,3 actuated coal and filter on pleated filter. Filtrate warm before boiling, take away the heating, add 4,5 ml concentrated salt acid before tart reaction and gradually cool. Stood out from solution benzoic acid filtrated, wash water, dry. Melting temp. 120-121°Ñ. Output 3 (68%).

 

Exercises

 

1. The reactions carboxylic acids with alcohol in presence of concentrated a sulphuric acid is called:

A) etherification

B) saponification

C) hydration

D) sulfonation

e) polycondencation

2. Indicate compounds with most strong acidity:

Π           

À) ÑÍ3 – Ñ – ÎÍ

 

B) ÑÍ3 – ÑÍ3    

                Î

C) ÑÍ3 – Ñ – Í

D) ÑÍ3 – ÎÍ

E) ÑÍ4

3 Indicate the reaction, which as a result of hydrolysis anhydride carboxylic acids are formed carboxylic acids

: À) (RCO)2O +H2O            2RCOOH

Á) RCOOR/ + H2O    H+    RCOOH + R¢OH

Â) RCH2OH   [O]    RCOOH

Ã) RCOOH + Na             RCOOH + Ң H2

Ä) R – C – R  KMnO4 RCOOH

      O

4. Indicate the compounds, which are formed as a result dehydration of carboxylic acids:

A) anhydrides

B) alcohols

C) hydrates

D) hydrites

E) esters

5. Indicate the functional group an carboxylic acids:

A) carboxylic group

B) hydroxil group

C) carbonyl group

D) aldehydes group

E) alkoxide group

6. The organic acids, containing in composition one carboxyl group are called:

A) monocarboxylic acids

B) saturated acids

C) unsaturated acids

D) aromatic acids

E) aliphatic acids.

7. Indicate the compounds, showing most strong acid characteristic:

À) ÑÍ2Ѳ – ÑÎÎÍ

B) ÑÍ3 – ÑÎÎÍ

C) ÑѲ3 – ÑÎÎÍ

D) ÑÍѲ2 – ÑÎÎÍ

E) ÍÑÎÎÍ

8. Alkaline hydrolysis esters with forming the alcohol and salts carboxylic acids carries the name to reactions:

A) saponifation

B) etherification

C) hydration

D) dehydration

E) sulfonation

9. The Deputies being present in molecule carboxylic acids, powerfully influences upon her(its) acidity in consequence of rendered or inductive effect. Install the sequence a growth power to acidity:

                        H

@  @    H – C - CO2H

                        H

   H

@  @    CH3 – C - CO2H

                           H

 

H

@  @   Cl – C - CO2H

                        H

10. The oxidation of the formic acid runs by reactions:

À) ÍÑÎÎÍ ® ÑÎ2 + Í2Î

Â) ÍÑÍÎ ® ÑÎ + Í2Î

Ñ) ÍÑÎÎÍ ® Ñ+  2 Í2Î

Ä) ÍÑÎÎÍ ® ÑÎ + Í2Î

Å) ÍÑÎÎÍ ® Ñ + Î + Í2Î

 

Laboratory work N 4

 

The reactions carboxylic acids and his (its) derivatives with nucleophilic reagents

 

Theoretical explanation.

 

Carboxylic acids are the organic compounds containing carboxyl functional group, —COOH, in their molecules. The carboxyl group is so named because it is a combination of carbonyl and hydroxyl groups. The compounds having the carboxyl group are known as carboxylic acids because they are markedly acidic in nature.

Although the carboxyl function is a combination of the carbonyl and the hydroxyl groups, the properties of each of the two functional groups are so modified by the presence of the other that the carboxyl group behaves as entirely a new functional group.

The carboxylic acids may be represented by the general formula, RCOOH, where R may be hydrogen, an aliphatic, or an aromatic group. The aliphatic carboxylic acids are often referred to as fatty acids because many of these can be obtained from the hydrolysis of the animal and vegetable fats. In fact, the designation “aliphatic” for the open-chain organic compounds arose from this early use of fats as a source of such compounds. The term “fatty acids” applies more specifically to the naturally occurring higher aliphatic carboxylic acids, e.g., palmitic acid (C15H31COOH), stearic acid (C17H35COOH), oleic acid (C17H33COOH), and linoleie acid (C17H31COOH), which occur as glycerides, the esters of glycerol.

 

Nomenclature

 

Two systems of nomenclature are usually used for naming the carboxylic acids: (i) common or trivial names, and (ii) IUPAC names. Currently both systems are in use, and the students should be familiar with both.

(i) Common or trivial names. Carboxylic acids were among the earliest of the organic compounds to be studied, and most of them have common names that were derived from Latin or Greek words that indicate one of their*natural origin. For example, the name of formic acid (HCOOH), the simplest member of the series, was derived from the Latin word formica meaning "ant", because it is secreted by ants and was obtained by the distillation of ants. The name of acetic acid (CH3COOH) was derived from the Latin word acetum meaning "vinegar", because it is present in vinegar. Similarly, the name of propionic acid (CH3CH2COOH) was derived from the Greek words prow meaning "first" and pion meaning "fat", because it was the first member of the series to show fatty acid properties. The name of butyric acid (CH3CH2CH2COOH) was derived from the Latin word butyrum meaning "butter", because it was found in rancid butter, and is largely responsible for its unpleasant odour. Common names of some other members of the family, along with their origin, are given below:

The positions of the substituents in the straight-chain carboxylic acids are indicated by the Greek letters α, β, γ, δ, etc., starting from the carbon atom bearing the carboxyl group. For example,

Generally, the parent acid is taken as the one of longest carbon chain, although some carboxylic acids are most conveniently named as derivatives of acetic acid. For example,

(ii) IUPAC names. In the early stages of the development of systematic nomenclature, most of the common names of carboxylic acids were generally accepted and adopted as such in the IUPAC system. However, with the passage of time the common names were replaced by the systematic names, and after 1972, the only common names acceptable in the IUPAC system are acetic acid and benzoic acid, though most of the common name are still in use.

According to the IUPAC system, the names of the carboxylic acids are derived from the names of the corresponding hydrocarbons having the same number of carbon atoms, by replacing the ending -e of the name of the hydrocarbon with -oic acid. For example,

Preparation of Carboxylic Acids.

Most of the aliphatic carboxylic acids are obtained from the naturally occurring oils and fats which on hydrolysis yield straight-chain carboxylic acids of even number carbon atoms ranging from six to eighteen. Other carboxylic acids can be prepared by synthetic methods. Since the carboxyl group represents the highest possible oxidation state of carbon (only in carbon dioxide can carbon attain a higher oxidation state), most of the methods used for the preparation of carboxylic acids involve oxidation of various compounds. All these methods are important; the choice depends on the availability of the starting materials. Some of these methods have already been discussed in previous chapters.

1. Oxidation of unsaturated hydrocarbons. Compounds having a suitably substituted carbon-carbon double or a triple bond undergo cleavage at the point of unsaturation when subjected to oxidation with alkaline permanganate, acidic dichromate, or nitric acid, to yield carboxylic acids. In order to yield a carboxyl group, a double-bonded carbon must have not more than one alkyl group attached to it. The metiiod has already been discussed in detail in Chapter 4.

This method, is not very useful for synthetic purposes because the yields are usually poor, and generally a mixture of acids is obtained. However, the oxidative cleavage of the unsaturated hydrocarbons can be used to locate the position of the unsaturation in the molecule.

2. Oxidation of alkylbenzenes. Aromatic carboxylic acids can be prepared by the oxidation of aliphatic side-chain present on the benzene ring, with alkaline KMnO4, acidic K2Cr2O7, or dil. HNO3. Any side-chain is converted to the carboxyl group, as discussed in Chapter 7.

3. Oxidation of primary alcohols and aldehydes. Carboxylic acids can also be prepared by the oxidation of primary alcohols with alkaline KMnO4, acidic K2Cr2O7, or nitric acid, as discussed in theme Alcohols.

4. Grignard synthesis. A carboxylic acid can be prepared by bubbling gaseous carbon dioxide into the ethereal solution of a Grignard reagent prepared from an alkyl halide, or by pouring the ethereal solution of the Grignard reagent onto crushed dry ice (solid carbon dixoide), and then acidifying the thus formed magnesium-salt of the carboxylic acid. The Grignard reagent adds to carbon-oxygen double bond of carbon dioxide just as to the carbonyl group of aldehydes and ketones.

Dry ice serves not only as a reagent but also as a cooling agent (the reaction is exothermic). The process is called "carbonation of Grignard reagents".

The Grignard synthesis of carboxylic acids is applicable to primary, secondary, and tertiary alkyl halides as well as to allyl, benzyl and aryl halides, provided that they have no other functional group in the molecule that can react with the Grignard reagent.

 

Acidity of Carboxylic Acids

 

When acetic acid is dissolved in water, it ionizes so that an equilibrium is established, as shown below:

At equilibrium, the concentrations of the ions are related to the concentration of the acid itself by the following expression:

The concentration of H2O is not included in the expression because it essentially remains constant for dilute solutions. Ka is known as the "equilibrium constant", "ionization constant", or "acidity constant".

Although the carboxylic acids are very weak acids as compared to the mineral acids, they are much stronger than the acidic organic compounds we have studied so far; they are even more acidic than phenols. The relative acidities of different types of compounds are: RCOOH> ArOH>HOH>ROH>HC ≡ CH>RH. Of all the types of aliphatic acidic organic compounds alcohols bear the closest structural resemblance to aliphatic carboxylic acids; both have C-hydroxyl group. A comparison of the acidities of carboxylic acids and alcohols is therefore of particular interest. Carboxylic acids (Ka ≈ 10-5) are about 1011 times as strong as alcohols (Ka ≈ 10-16).

We can account for the greater acidity of carboxylic acids as compared to alcohols by comparing the relative stabilities of the compounds and of their anions (conjugate bases). Any factor that stabilizes the conjugate base of an acid more than it stabilizes the acid itself will increase the strength of the acid. Let us examine the structures of a carboxylic acid and an alcohol, and their conjugate bases.

A carboxylic acid is actually considered to be a resonance hybrid of two structures which are not equivalent (I and II). On the other hand, the carboxylate ion is a resonance hybrid of two equivalent structures (III and IV).

These facts are supported by the x-ray and electron diffraction studies of the carbon-oxygen bond lengths in formic acid and its anion. In formic acid, one carbon-oxygen bond length is 1.34A (single bond) and the other is 1.20A (double bond), whereas in the formate ion both carbon-oxygen bonds are equivalent with a bond length of 1.26A which is in between the carbon-oxygen single and double bond lengths. According to the theory of resonance, a resonance hybrid of two equivalent structures is more stable than the resonance -hybrid of two non-equivalent structures. Thus, the resonance stabilization is far greater for the anion of a carboxylic acid than the acid itself. As a result a carboxylic acid tends to ionize and show acidic property.

 

Reception of metha-nitrobenzoic acid          

 

 

Reagents: benzoic acid 6 l (0,05 mole); sulphuric acid 29 g (ð = = 1,84); potassium nitrate 12 g; barium hydrooxide 21.

Utensils and equipment: glass porcelain or three throat (òðåõãîðëàÿ) flask   by capacity 50 ml; the motor with mixer; installation for overtake (ïåðåãîíêè) about the water ferry; flask of Bunzene and funnel Boehner; the device for hot filtering.

In a porcelain glass or three throat flask pour 15,6 ml of  sulphuric acid and heat up on water áàíå up to 70°Ñ (thermometer in a glass). Delete áàíþ and at constant hashing gradually add to solution powder mix 6 g benzoic acid and 12 g potassium nitrate. A mix add so that temperature of reactionary weight was not higher 80°Ñ. In case of necessity her(it) cool with the help áàíè with cold water. Then reactionary weight heat up on water áàíå at 80-90°Ñ so long as on a surface the oil layer nitrobenzoic acid is not formed which after cooling hardens. The bottom layer containing a mix KHSO4 and H2SO4, separate, and the stayed deposit wash out by cold water and twice boiling water.

Acid as barium salt is cleared metha- nitrobenzoic which is not enough dissolve in cold water. Crude metha-nitrobenzoic acid dissolve in 20-multiple (on weight) amount of water and process by a hot solution of barium hydrooxide before slightly alkaline reaction. Then add 250 ml of water and heating mix before complete dissolution of deposit. A hot solution filters and after cooling filtrate barium salt metha-nitrobenzoic acid.

For reception free metha-nitrobenzoic acid her(it) barium salt heat up with %10 -s' hydrochloric acid; after cooling filtrate the dropped out acid, wash out by cold water and over crystallite from hot water. Melting temperature of metha- nitrobenzoic acid 141°Ñ.

To remove inphrared spectrum of metha- nitrobenzoic acid. In the spectrum there are strips of absorption of group - ÑÎÎÍ (1710, 3350 ñì"1) è NO2 (1560, 1340 ñì"1).

 

DERIVATIVES OF CARBOXYLIC ACIDS

 

We have seen that carboxylic acids can be converted into various types of its functional derivatives simply by replacement of —OH of the carboxyl group by other groups such as —CI, —OCOR, —OR, and —NH2. The functional derivatives which are obtained are acid chlorides, acid anhydrides, esters and amides, re—actively.

Carboxylic acids and their functional derivatives have acyl group, R—C—, as a com­mon structural feature.

 

ACID CHLORIDES

 

Acid chlorides are the substances which are formed by replacing —OH of the carboxyl group by —CI. Since they contain chlorine attached to an acyl group, they are also known as acyl chlorides. Though other acid haJides are also known, acid chlorides are the most common.

The names of the acid chlorides are derived from the names of the corresponding carboxylic acids by replacing the ending -ic of the parent name of the acid by -yl, and replacing the word acid by the word chloride. Remember that the "o" of the ending -oicis retained. For example,

 

Acid chlorides oi upto thirteen carbon atoms are liquids at room temperature. Their boiling points are lower than those of the carboxylic acids from which they are derived, even though their molecular weights are higher. However, their boiling points are close to those of alkyl chlorides, aldehydes and ketones, and other unassociated liquid compounds having about the same molecular weight. Acid chlorides generally are soluble in common organic solvents.

 

Preparation of Acid Chlorides

 

Since acid chlorides are the most reactive of the functional derivatives of carboxylic acids, they are usually prepared so that they can be used for the preparation of other functional derivatives of acids.

Preparation of acid chlorides from carboxylic acids requires replacement of —OH of the carboxyl group by—Cl. This can not be achieved by simply treating a carboxylic acid with chloride ion because the strongly basic hydroxide ion, OH", cannot be pushed away from the acyl carbon with a weakly basic chloride ion, CI". Instead, they are usually prepared by treating the carboxylic acids with acid chlorides of inorganic acids such as phosphorus trichloride, PC13, phosphorus pentachloride, PC15, or thionyl chloride, SOC12, which are the acid chlorides of phosphorus, phosphoric, and sulfurus acids, respectively. The reaction takes place easily under mild conditions.

In these reactions OH- is not directly displaced by Cl-, rather it is first converted into a very good leaving group which is then displaced by Cl-, as show below in the mechanism of the reaction of a carboxylic acid with thionyl chloride.

Thionyl chloride is particularly useful because the products, besides the acid chloride, are gases and therefore escape from the reaction mixture. Any unreacted thionyl chloride, being low-boiling (79°C), can be easily removed by distillation.

 

ACID ANHYDRIDES

 

Acid anhydrides are the substances which are obtained after the elimination of a water molecule from the carboxyl groups of two carboxylic acid molecules (or from the two carboxyl groups of dicarboxylic acids). They are regarded as diacyl oxides, just as ethers are regarded as dialkyl oxides.

The names of the simple acid anhydrides (obtained from two molecules of the same acid) ar,e derived from the names of the corresponding carboxylic acids by replacing the word acid by the word anhydride. For mixed acid anhydrides (obtained from two different acids), the parent name of each acjd is written in alphabetical order, followed by the word anhydride.

The lower-molecular-weight anhydrides are liquids at room temperature. The anhydrides above nonanoic anhydride are solid. The boiling points of anhydrides are close to those of aldehydes, ketones, and other unassociated compounds of comparable molecular weight: Anhydrides are generally soluble in common organic solvents.

            Preparation of Acid Anhydrides

Acetic anhydride is the simplest aliphatic anhydride known. The anhydride of formic acid is unknown because when formic acid is treated with dehydrating agents it yields carbon monoxide and water.

In fact, acetic anhydride is the only monocarboxylic acid anhydride that is encountered frequently. It is a very important industrial chemical.

 

ESTERS

 

Esters are the substances which are obtained after the elimination of a water molecule between an acid and an alcohol.

Since esters are regarded as formed from an acid and an alcohol, their names are derived by writing the name of the alkyl group of the alcohol, followed by the name of the acid with the ending -ic acid replaced by -ate. For example,

If the ester function (—COOR) is to be treated as a substituent, it is designated as a carboalkoxy group.

 

C2H5OOCH2CH2CH2COOH 4-Carboethoxybutanoic acid

 

Generally, esters are liquids or low-melting solids, and are lighter than water. All methyl and ethyl esters are liquids at room temperature. The boiling points of esters are much lower than those of acids or alcohols of comparable molecular weights because the association by hydrogen bonding, which is largely responsible for the comparatively high boiling points of acids and alcohols, is not possible in esters.

However, the boiling points of esters are close to those of aldehydes and ketones having about the same molecular weights. The fact that an ester is usually a liquid, even though its parent acid may be a solid, may also be attributed to the loss of hydrogen bonding on esterification.

Esters generally are insoluble in water but soluble in common organic solvents. Ethyl acetate is also commonly used as a solvent.

Esters are usually used as active ingredients in medications and as flavouring agents. Ethyl acetate is a common constituent of many kinds of paint removers and is also used as a nail polish remover. Esters, in the form of naturally occuring fats and oils, form a part of our daily diet.

 

Preparation of Esters

 

Esters are generally prepared from carboxylic acids or their functional derivatives by their reaction with alcohols (or phenols). Some of the common methods for the preparation of esters are given below.

1. Direct esterfication. Esters are usually prepared by refluxing a mixture of a carboxylic acid and an alcohol in the presence of a little mineral acid, usually cone. H2SO4 or dry HC1, which serves as a catalyst. This reaction which is known as esterification, is reversible, and at equilibrium, appreciable quantities of both reactants and products are present.

However, the equilibrium can be shifted to the right side by removing water from the reaction mixture as it is formed, and thus the yield of the ester can be increased.

2.    Esters by the use of diazomethane. Methyl esters can be prepared by the reaction of carboxylic acids with diazomethane in ethereal solution.

The reaction occurs almost instantaneously, but is limited by the high price and the hazardous nature of diazomethane.

 

Laboratory work: Syntheses n-butyl acetate, isobutyl acetate, ethyl acetate

 

The reagents: acetic acid icy 6 ml (0,1 moths), n-butyl alcohol 6 ml (0,105 moths), sulphuric acid ( -1,83)- catalytic amount (2-3 dripped), hydracarbonate  sodium (5% water solution) 10-15 ml; the sulphate magnesium roasted 5-8 g.

 Dishes and equipment: round bottom flask by capacity 50-100 ml; the refrigerator; the trap Dyne-Stark; divisor crater by capacity 100 ml; the instrument for distillation with deflegmotor.

                                                     Í+

   CH3COOH + n-Ñ4Í 9ÎÍ           ÑÍ3Ñ – ÎÑ4Í 9 + Í 2Î

                                                                       Î

 

In round bottom flask, supplied by trap Dyne-Stark for branch of water and inverse refrigerator, place 6 ml icy acetic acid, 6 ml n-butyl alcohol, several drops by concentrated chamois of the acid. Then contribute “boiler” and warm on sand bath or asbestos net so that liquid it is enough intensive entered in trap, but in ditto time not “choked” refrigerator. Herewith stratify liquids occurs in trap. Upper (the organic layer), layer containing in the beginning as formed esters, so and source alcohol and acid, returns in flask, but lower water layer increases by degrees.

 

On cessation of the arrival drop water in trap (the under-stratum) are cooled, having  disturbed   contents   of   the  trap with reactionary mass, washes the product in divisor crater by in the beginning water (for removing the acids), then by solution 5% of the soda (for neutralization of the tart ambience) and newly water. Since esters under eager joggling with washing liquid give the steadfast emulsions, in order to avoid this divisor crater reasonable on joggle, but make her motion, like “eight”.

1- flask, 2 - trap, 3 - refrigerator

 

The constants of alkylacetate are brought in tabl.1.

 

alkilacetate

molecular mass

temperature of the boiling

d420

nD20

Ethylacetate

88

77

0,9008

1,3723

butylacetate

116

126

0,8813

1,3948

isobutylacetate

116

117

0,8723

1,3901

 

Exercises

 

1. Indicate the compounds, which are formed as a result dehydration of carboxylic acids:

A) anhydrides

B) alcohols

C) hydrates

D) hydrites

E) esters

2. Indicate the functional group an carboxylic acids:

A) carboxylic group

B) hydroxil group

C) carbonyl group

D) aldehydes group

E) alkoxide group

3. The organic acids, containing in composition one carboxyl group are called:

A) monocarboxylic acids

B) saturated acids

C) unsaturated acids

D) aromatic acids

E) aliphatic acids.

4. Indicate the compounds, showing most strong acid characteristic:

À) ÑÍ2Ѳ – ÑÎÎÍ

B) ÑÍ3 – ÑÎÎÍ

C) ÑѲ3 – ÑÎÎÍ

D) ÑÍѲ2 – ÑÎÎÍ

E) ÍÑÎÎÍ

5. Alkaline hydrolysis esters with forming the alcohol and salts carboxylic acids carries the name to reactions:

A) saponifation

B) etherification

C) hydration

D) dehydration

E) sulfonation

6. The Deputies being present in molecule carboxylic acids, powerfully influences upon her(its) acidity in consequence of rendered or inductive effect. Install the sequence a growth power to acidity:

                        H

@  @    H – C - CO2H

                        H

   H

@  @    CH3 – C - CO2H

                           H

 

H

@  @   Cl – C - CO2H

                        H

7. The oxidation of the formic acid runs by reactions:

À) ÍÑÎÎÍ ® ÑÎ2 + Í2Î

Â) ÍÑÍÎ ® ÑÎ + Í2Î

Ñ) ÍÑÎÎÍ ® Ñ + 2 Í2Î

D) ÍÑÎÎÍ ® ÑÎ + Í2Î

Å) ÍÑÎÎÍ ® Ñ + Î + Í2Î

8. Dispose in row on increase of acidity:

           1)           Î

ÑÍ2F– Ñ      

              ÎÍ

 

2)               Î

ÑÍ2Cl– Ñ        

                ÎÍ

 

3)               Î

ÑÍ2– Ñ           

              ÎH

 

4)                    Î

ÑÍ3-CH2– Ñ       

                     ÎÍ

 

5)                                Î

ÑÍ3 –CH2 – ÑH2 - C           

                                  ÎH

À) 5 < 4< 3 < 2 < 1

B) 4< 3< 5 < 2 < 1

C) 3< 5< 1 < 4 < 2

D) 4< 3< 5 < 1 < 2

E) 1< 2< 3 < 4 < 5.

9. The salts of the wine acid are identified:

A) tartrate

B) sulphate

C) oxalate

D) citrate

E) carbonate

10. The salts of the oxalic acid are identified:

A) oxalate

B) sulphate

C) tartrate

D) citrate

E) carbonate

 

Organic Nitrogen Compounds

 

Theoretical explanation.

 

There is a very large number of organic compounds that contain nitrogen in their molecules. In these compounds nitrogen mostly forms a part of their functional groups. The chemistry of the nitrogenous organic compounds varies very widely because of the variety of oxidation states available "to nitrogen. The nitrogen-containing functional groups are of varying importance'in organic chemistry; the most important of these are amines.

 

AMINES

 

Amines are derivatives of ammonia in which one are more hydrogen atoms have been replaced by alkyl or aryl groups. Amines are classified as primary, secondary, or tertiary depending on the number of hydrogen atoms replaced in the ammonia molecule.

In secondary and tertiary amines the alkyl or aryl groups may be the same or different. The designations primary, secondary, and tertiary are used here to denote the degree of substitution on nitrogen, not the nature of the alkyl groups.

Nomenclature

Like most other classes of organic compounds amines are named in serveral ways:

1. The common names of amines are derived by using the suffix -amine, preceded by the name or names of the alkyl groups in alphabetical order. The prefixes di- or tri- are used for identical alkyl groups. The names are written as one word.

2. The IUPAC names are derived in the same manner as for alcohols, i.e., the ending -e of the name of the parent hydrocarbon containing the -NH2 group, is substituted by -amine. For secondary and tertiary amines, the longest chain is selected as the parent alkane; in case of equal chain-lengths the parent alkane is the one with the greater number of substituents. The remaining alkyl groups are named as substituents by using the prefix N- to indicate that they are attached to nitrogen.

 

 

Preparation of Amines

 

A number of methods are available for the preparation of amines. Some of them are of general nature and can be used for the preparation of all types of amines, while the others are applicable only to a specific type of amines. Only some of the representative methods are described here to illustrate the types of reactions involved.

1. Alkylation of ammonia (or amines). Primary alkyl halides can be converted into primary amines by treatment with aqueous or alcoholic solution of ammonia in a reaction which is also known as arnrnonolysis of alkyl halides. The reaction proceeds by the SN2 mechanism and yields salts of primary amines from which the free amines can be liberated by treatment with a base.

The reaction is generally limited to the aliphatic alkyl halides because of the low reactivity of aryl halides toward nucleophilic substitution. Like other nucleophilic substitution reactions, elimination tends to compete with substitution. Ammonolysis thus gives the highest yields with primary alkyl halides where substitution predominates, and is virtually worthless with tertiary alkyl halides where elimination predominates.                           ..

This reaction is of very limited synthetic application because of the accompanying side reactions. The initially formed alkylammonium halide can react with another molecule of ammonia to give the primary amine and ammonium halide. Since the primary amine is also nucleophilic, it can compete with ammonia to react with alkyl halide and give dialkylammonium halide which then yields a secondary amine.  In this way the reaction continues to give a tertiary amine,  and even aquaternary ammonium salt (in which all the hydrogens of the ammonium ion, NH4, have been replaced by alkyl groups) may be formed. In fact, a complex mixture is formed even when equimolar quantities of alkyl halide and ammonia are used.

The "' overalkylation" can be minimized by using a large excess of ammonia. In this case a molecule of alkyl halide is more likely to encounter a molecule of ammonia and alkylate it, rather than a molecule of the amine produced. However, it is the most general method for the preparation of amines of all kinds.

2. Reductive amination. Ammonia and primary amines condense with aldehydes and ketcnes to form imines. However, if a mixture of a carbonyl compound and ammonia (or a primary or secondary amine) is treated either with hydrogen and a suitable hydrogenation catalyst such as Ni, Pt or Pd, or with sodium cyano borohydride (NaBH3CN), the initially formed imine is reduced to an amine. Sodium cyano borohydride is less reactive than sodium borohydride (NaBH4), and, therefore, it reduces only the imine, and does not reduce the carbonyl group. The reaction, known as reductive amination, is of general type, and can be used for the preparation of a primary, secondary, or tertiary amine depending on whether ammonia, primary amine, or secondary amine is used as the starting material; the reductive amination process adds one alkyl group to the nitrogen atom of the amine used. The reaction has been used successfully with a wide variety of aldehydes and ketones, both aliphatic and aromatic.

The primary amine formed in the reductive amination of a carbonyl compound with ammonia, may also react with the carbonyl compound and yield a secondary amine in an undesirable side reaction. However, this side reaction may be minimized by using a large excess of ammonia. At the same time, this method can be used for the preparation of a secondary amine if a primary amine is used in place of ammonia.

Reductive amination with ketones yields primary amines containing a secondary alkyl group, which are difficult to obtain bythe alkylation method because of the tendency of the secondary alkyl halides to undergo elimination. For example, in an attempt to prepare cyclohexylamine by the ammonolysis of bromocyclohexane, cyclohexene is obtained as the major product, whereas the reductive amination of cyclohexanone yields cyclohexylamine in a good yield. Thus, if we wish to prepare cyclohexylamine from cyclohexanol, we should follow the route of reductive amination, and not that of alkylation, as show below:

Reductive amination can also be used for the preparation of tertiary amine by using a secondary amine for amination. A tertiary amine with at least one of the alkyl groups as methyl, can be prepared by using formaldehyde as the carbonyl compound and formic acid as the reducing agent.

The intermediate that is reduced in this case, is an immonium ion, as shown below:

 

Physical Properties of Amines

 

Amines are polar compounds, mostly liquids. They can be recognized by their distinctive odours. The lower-molecular-weight amines smell very much like ammonia, and the higher amines have unpleasant "fishy" odour.

Aromatic amines are mostly colourless in the pure state, but tend to turn dark on standing because of oxidation by air. They are generally very toxic, and are often fatal when absorbed through the skin.

Physical properties of some amines are presented in Table 11.1 to show certain trends, like many other classes of compounds. The melting points, boiling points and densities of amines increase with molecular weight as a consequence of the greater intermolecular attraction in the larger members of the series.

The boiling points of primary amines are in between those of hydrocarbons and alcohols of comparable molecular weights, indicating that primary amines are associated by hydrogen bonding, like alcohols, though the association in primary amines is weaker than that in alcohols.

All amines, including tertiary amines, are capable of forming hydrogen bonds with water, as shown below:

As a result, lower-molecular-weight amines are quite soluble in water. As the length of the carbon chain increases, the solubility of amines in water decreases, the borderline solubility being at about six carbon atoms. Amines are generally soluble in less polar organic solvents like alcohol, ether and benzene.

 

Basicity of Amines

 

Because of the presence of a nonbonding electron pair on nitrogen, an amine can accept a proton from an acid, arid thus can act as a base.

Since nitrogen is less electronegative than oxygen, the nonbonding electron pair of amines is more available for protonation than that of water, making amines more basic than water. Amines can therefore abstract proton from even water to give ammonium and hydroxide ions (aqueous solutions of amines turn litmus paper blue). When an amine dissolves in water, the following equilibrium is established.

The equilibrium constant for this acid-base reaction between an amine and water, which is also called the( basicity 'constant of amine, and is symbolized by Kb, is given by the expression.

The concentration of water is not included in the equilibrium expression because it is present in large excess and is essentially constant. Just as the acidity constants of acids are conveniently expressed in terms of pKa values, the basicity constants of bases are conveniently expressed in terms of pKb values (pKb = -log Kb). The Kb or pKb values of amines are the measure of their relative base strengths. The larger the values of Kb or the smaller the values of pKb, the stronger the base, i.e., the greater its tendency to accept a proton from water.

As we have seen, the basicity of an amine is a consequence of the. availability of the electron pair on the nitrogen atom. Thus, any structural feature that contributes to increase the electron density at the nitrogen atom would be expected to increase the basicity, while the structural feature that withdraws the electron density from nitrogen would be expected to decrease the basicity. For example, the electron-donating inductive effect of the methyl group makes methylamine (pK = 3.36) a stronger base than ammonia.

Alternatively, in the above acid-base equilibrium reaction of an amine with water, any structural feature that stabilizes the ammonium ion (relative to the free amine) would shift the equilibrium to the right, making the amine a stronger base. A structural feature that stabilizes the free amine (relative to the ammonium ion) would shift the equilibrium to the left, making the amine a weaker base. Let us consider, for example, the reactions of ammonia and methylamine with water.

In the reaction of methyiamine, the methyi group stabilizes the methylammonium ion (relative to methylamine) by dispersing its positive charge through its electron-donating inductive effect. This extra stabilization is not possible for the unsubstituted ammonium ion (relative to ammonia). Methylamine is therefore a stronger base than ammonia.

Substituents on the ring have a pronounced effect on the basicity of aromatic amines. An electron-donating substituent such as methyl group, increases the basicity of aniline by dispersing the positive charge of the anilinium ion, and thus stabilizing it relative to the aniline. An electron-withdrawing substituent such as nitro group, decreases the basicity of aniline by intensifying the positive charge of the anilinium ion, and thus destabilizing it relative to the aniline. Generally, the substituents that activate an aromatic ring toward electrophilic substitution, increase the basicity of anilines, and the substituents that deactivate the aromatic ring toward electrophilic substitution, decreases the basicity of anilines. However, the ortho effect (p. 467) operates here as well. For example, o-methyianiline is less basic than aniline, though a methyl group in the meta or para position exerts its typical electron-donating inductive effect to enhance the basicity of aniline. The electron-withdrawing substituents decrease the basicity of aniline to a much greater extent from the ortho position than from the meta or para position . The nitro group has an especially pronounced effect in the para position because in this position it is in direct conjugation with the amino group.

 

Laboratory work

Qualitative reactions of nitrocompounds

 

Reduction nitrocompounds. All nitrocompounds reduce to primary àmines. If forming amine flying, his(its) possible find the colouration èíäèêàòîðíîé áóìàæêè on change:

 

R-NO2 + 6H → RNH2 + 2H2O

 

The experience (under pulling!). Several drops nitromethane dissolve in 1-2 ml 30%-íîãî of the solution acerbic wax, contribute the small bit of the zinc and mixture warm. Note the appearance of the typical scent methylamine and blue turning to test tubes humid red litmus paper.

The reaction with nitrous acid. The typical qualitative reaction of primary and secondary nitrocompounds is a reaction with nitrous acid.

Primary nitrocompounds forms with nitrous acid nitrolic acids, which alkaline salts are painted in orange-yellow colour:

 

R-ÑÍ2-NO2 + HONO → R – C - NO2 + H2O

                                                     NOH

     R – C - NO2 + H2O + NaOH → R – C - NO2 + H2O

            NOH                                                   NONa

 

The experience. Several drops nitromethane mix with 1,5 ml 1 moth solution acerbic wax. Gottig transparent liquid cool in water and add 0,5-1 ml 10% of the solution of the nitrite sodium and then 5% thread sulfuric acid, on drop, before appearance orange-red colour and the following his(its) disappearances. The Accompaniment alkali once again causes colour.

Secondary nitrocompounds nitrous acid give so named psevdonitriles. The solutions psevdonitriles in organic solvent have a turquoise colouration:

R2CHNO2 + HONO → R2 – C - NO2

                                          N=O

 

The experience. To 0,5 ml 2 - nitropropane add 3 ml 2,5% alcohol-water solution acerbic potassium and 0,5 g nitrite sodium whereupon carefully flow 20% sulphuric acid before appearance turquoise colour.

For tertiary aliphatic nitrocompounds specific reaction of the finding not there is.

Sulfoacids. The qualitative reactions.

Fusing with NaOH. The products of reactions are different for sulfoacids aromatic and fat row:

 

ArSO3Na + 2NaOH → ArONa + Na2SO3 + H2O

CnH2n+1SO3Na + NaOH → CnH2n + Na2SO3 + H2O

 

The cooled lash acidate. The separation of dioxide of sulphurs points to presence sulfogroups in analysing compounds. In the event of sulfoacids of the aromatic row acidic lash must give the qualitative reaction on phenols.

 

Exercises

1. The derivatives of carboxylic acids, beside which instead of OH-groups in molecule is substituated by NH2 -, -NHR or NRR/ are identified:

A) amides

B) amines

C) nitrocompounds

D) amino acids

E) hydroxylamines

2. Amides in contrast with amines are weak bases and his(its) water solutions:

A) neutral

B) alkaline

C) weakly alkaline

D) weakly acidity

E) acidity

3. Alkylation of ammonia with alkyl halides are identified:

A) Gofman reaction

B) Zinin reaction

C) Kucherov reaction

D) Vagner reaction

E) Favorsky reaction

4. Reagent used for qualitative determination of the aniline:

A) Lukas reagent

B) Tollens reagent

C) Felling reagent

D) Bromine water

E) KMnO4 (H2SO4)

5. What ia called amides, beside which two atoms of the hydrogen is substituted with the other alkyl groups:

A) N-substituted amides

B) polyamides

C) amino acids

D) peptides

E) aminoalcohols

6. What is identified reaction of the reception aromatic amines by reduction aromatic nitrocompounds:

A) Zinin reaction

B) Kucherov reaction

C) Gofman reaction

D) Vagner reaction

E) Favorsky reaction

7. What is identified the reaction of the reception b- an nitrostyrene from benzaldehyde and nitromethane?

A) Konovalov reaction

B) Konvenagelya reaction

C) Kolib reaction

D) Meyer reaction

E) Kucherov reaction

8. What from offered mechanism pertains to reactions of Konovalov?

A) ionic

B) radical

C) ion-radical

D) radically - ionic

E) SE

9. When recovering aliphatic nitrocompounds with aluminium lithium hydride is got:

A) àmines

B) nitrocompounds

C) azocompounds

D) diazocompounds

E) ocsyms

10. At interaction what reagent get nitromethane in laboratory conditions?

À) ÑÍ4 + HNO3                                 

B) NaO – C – CH2Cl+ NàNO2

                O

C) CH4 + HNO3 + H2SO4           

D) CH2 = CH2 + NaNO2        

E) CH4 + HNO2+ NO2

 

DIAZOCOMPOUNDS

 

The Purpose of the work: study of the methods of the reception diazocompounds and his(its) derived, familiarization physical-chemical characteristic diazocompounds.

 

GENERAL INFORMATION

 

At interaction of primary aromatic amines with nitrous acid are formed salts diazonium (diazotization reaction). As a rule, diazotization conducts in water solution, getting nitrous acid from nitrite sodium and mineral acid:

(Õ=Ñ1-, Âã-, NO3-, HSO4- and others).

The mineral acid take in a certain excess. During diazotization and at the end its)solution must have a well-marked tart reaction (pH 1-2) on universal indicator. This necessary, first, therefore that balance ion ammonium « àìèí under more high importances pH is displaced aside free basis, which vastly harder opens in water. Secondly, excess of the acid required for prevention of the combination formed salts of diazonium with not yet unreacted free amines (formation diazoaminocompounds). In third, under more high importances pH reactionable of diazonium the form agent move over to inactive forms. As contrasted with acid, the nitrite sodium in excess is not used, since diazotization - a reaction, running between amines and nitrite practically quantitative but. The excess of the nitrous acid disadvantage influences upon stability diazosolutions. So it is necessary exactly take amount of the nitrite sodium. Diazotization is considered finished if through 5 mines after accompaniment of the next portion of the nitrite sodium test on contents of the nitrous acid in solution will remain positive (the indicator – iodostarch paper).

 

Laboratory work

Diazo- and azocompounds. The Syntheses of iodinebenzene.

 

C6H5NH2 +NaNO2 ® C6H5N2+Cl- + NaCl + 2H2O

C6H5N2+Cl- + KI ® C6H5I + KCl + I2

 

The reagents: aniline 3,1 (0,033 moths); the salt acid concentrated 8,3 ml (r-1,19); the nitrite sodium 2,3 (0,033 moths); èîäèä potassium 6,7 (0,04 moths); the caustic soda 30%-whine solution.

The Dishes and equipment: Porcelain glass by capacity 100 ml; the round flask by capacity 250 ml; the crater of drop, motor with mixer; installation for distillation with ferry; installation for distillation with air refrigerator.

 

In porcelain glass by capacity 100 ml mix 8,3 ml salt acid with 8,5 ml water and to solution add 3,1 fresh distelled aniline. The solution cool in 1-2°Ñ and gradually add from dropping crater under unceasing mixing 2,3 sodium nitrite in 6,5 ml water. The accompaniment of the nitrite sodium follows to lead with such velocity that temperature did not rise above 5°Ñ. For this glass with reactionary mass cool the ice or bit of ice throw in reactionary mixture. The completion to reactions check on iodostarch paper.

The received solution of salts of diazonium gradually, under mixing, add in round flask by capacity 250 ml with solution 6,7 potassium iodide and in 10 ml water and mixture leave to stand on 2 hours. Then to flask join the air refrigerator and warm on boiling water bath before cessation of the highlighting of the nitrogen. The Solution based the concentrated solution an alkali before strong basicity of the reactions to the by-product to reactions - a phenols. Iodinebenzene drive away with water ferry. The distillation lead until from refrigerator not stopping flow down oil heavy dripped.

Iodinebenzene separate and dry under chloride calcium. Distil from small flask, collecting faction with Boiling temp. 185-189°Ñ,  n = 1,6213. Output of iodinebenzene is 5g.

                                      

Reception of methyl orange

 

 

Reagents: 1,7 g of sulphanylic acid or 2,1 g of dihydric of sulphanilic acid; 1,2 g of dimethylaniline; 0,7 g of sodium nitrite.

Utensils and equipment: wide container or glass by capacity 50 ml.

In wide container or glass mix weighting of sulphanilic acid, dimethylaniline and 10-15 ml of water. Received thus transparent, the slightly painted solution cool up to 10°Ñ and mix with solution 0,7 g sodium nitrite in 5-7 ml of water. A mix at 10-15°Ñ 30 mines. Thus the red colouring of reactionary weight is replaced yellow.

Formed sodium salt of dye filtrate, wring out and crystallite from 25-30 ml of water. Dye dry on air or in a drying case at 40-50°Ñ.

Exercises

1. Under alkylation the salts of the nitrous acid are formed:

A) esters of nitrous acid and nitrocompounds

B) esters of nitrous acid and

C) nitrozocompounds and nitrocompounds

G) esters of nitrous acid and ocsym

D) nitrous acid and nitrozocompounds

2. Indicate the industrial conditions of nitration of benzene:

A) by mixture nitric and sulphuric acids

B) concentrated by nitric acid in steam phase

C) oxides nitrogen in whitness of nitric acid

D) oxides nitrogen in steam phase

E) diluted by nitric acid under high temperature

3. What compounds are formed at interaction nitroalkanes with concentrated by sulphuric acid?

A) carboxylic acid and hydoxylamines

B) àldehyde and hydoxylamines

C) carboxylic acid and methylamines

D) àldehyde and nitrozoalkane

E) ketones and ethylamines

4. Name following compound on nomenclature IUPAC:

                   

 

           ÑÍ3 – ÑÍ – ÑÍ = CH – NO2

 

                      CH3

 

A) 3 - methyl - 2 - nitrobutene - 1

B) 2 - methyl - 4 - nitrobutene - 3

C) 3 - methyl - 1 - nitrobutene – 1

D) 1 – nitro - 3 - methylbutene - 2

E) 3,3 - dimethyl - 1 - nitropropene - 1

5. In what hybrizited is found atom of nitrogen and one atom of the oxygen innitro group?

A) atom nitrogen - sp2 atom of the oxygen - sp2

B) atom nitrogen - sp1 atom of the oxygen - sp3

C) atom nitrogen - sp2 atom of the oxygen - sp1

D) atom nitrogen - sp3 atom of the oxygen - sp2

E) atom nitrogen - sp2 atom of the oxygen - sp3

6. What compounds are formed at interaction primary alkanes with strong mineral acid?

A) nitrocarboxylic acid and hydoxylamines

B) carboxylic acid and salt of hydoxylamines

C) primary alcohol and salt of hydoxylamines

D) àldehyde and salt of amines

E) esters and salt of amines

7. What compounds are formed under interaction secondary nitroalkanes with strong mineral acid?

A) ketones

B) ocsymes

C) aldehydes

D) carboxylic acids

E) ketoalcohols                                                         

8. Name following compound:

CH3  - C – NH - OH  

 

          Î

A) nitrolic acid

B) hydroxamic acid

C) amides acetic acid

D) oxim acetic acid

E) aminomethylketone

9. What get of nitromethane in industry?

A) by nitration methane in gas phase

B) by nitration methane with diluted nitric acid

C) by nitration mixture of the methane and ethsne with nitrogen oxide

D) by nitration propane with concentrated nitric acid

E) vapour fazed nitration of propane

10. Indicate the tautomered form of nitroethane:

À) ÑÍ3 – ÑÍ2 - NO2 « ÑÍ3 – ÑÍ - N=Î

 

                                                           ÎÍ

B) ÑÍ3 – ÑÍ2 - NO2 « ÑÍ2 –ÑÍ2–N=Î

 

                                      ÎÍ

C) ÑÍ3–ÑÍ2-NO2 « ÑÍ2–ÑÍ=N+-ÎÍ

 

                                                    Î-

D) ÑÍ3-ÑÍ2-NO2 « ÑÍ2=ÑÍ-N-ÎÍ

 

                                                  ÎÍ

E) ÑÍ3 -ÑÍ2-NO2 « ÑÍ2-ÑÍ=NÎÍ

 


                                         ÎÍ

 

 

 

Heterofunctional compounds. Hydroxi – and ocsoacids

 

Theoretical explanation.

 

Compounds, containing in molecule simultaneously hydroxyl and carboxyl groups are called hydroxi acids.

Depending on locations hydroxyl groups to carboxyl group distinguish α-, β-, γ- and other hydroxi acids. In nature of these acid plenty of and in many events, are formed at oxidation of the naturalcompounds. Their name is produced according to nomenclature of carboxylic acids. Many hydroxi acids enter in composition of the natural compounds so sometimes their name on natural origin. Hydroxi acids with determined by temperature of the melting, colourless crystalline material.

Glycol acid ÍÎÑÍ2ÑÎÎÍ - a simplest representative of hydroxi acids. Meets in vegetable and fruit, for instance, in beet, grape. The temperature of the melting 80°Ñ.

The Dairy (α -hydroxypropionic) acid ÑÍ3ÑÍ(ÎÍ)ÑÎÎÍ - known as product milk acidic fermentations of the lactose, being kept in milt and other carbohydrate. The acidic milk, yogurt, sauerkraut, salty cucumber, tomatoes and t. d. contains in quite a numbers milk acid. Her(its) saltsis called lactates.

The Dairy acid contains asymmetric atom of carbon and so can exist in the manner of two enantiomers of the forms. In organism L(+)-dairy acid, named also meetdairy acid, is one of the products of the conversion of the glucose (glycolise). She is accumulated in ìûùöàõ under intensive work in consequence of which in they appear the typical pain. The reason of the accumulation of the dairy acid - a defect of the oxygen that causes reduction an pyrogrape acids in milk with participation coferment of HADH.

ÑÎÎÍ                                             ÑÎÎÍ

 ‌׀                                                        ‌׀

Ñ=Π     +    ÍÀDÍ +  Í+  → ÍÎ – Ñ – Í    +      ÍÀD+

׀                                                         ׀

ÑÍ3                                                                           ÑÍ3

Pyrogrape acid                            L(+)-dairy acid

 

During rest spares oxygen are renewed, and dairy acid acidifies back into pyrogrape acid.

β-hydroxyoilic acid ÑÍ3ÑÍ(ÎÍ)ÑÍ2ÑÎÎÍ as intermediate product β -oxidations of the fat acids is accumulated in organism by sick sugar diabetes, being, in turn predecessor of acetoacetic acid.

γ- hydroxyoilic acid ÍÎ-ÑÍ2-ÑÍ2-ÑÍ2-ÑÎÎÍ renders the narcotic action, practically nontoxic. It Is Used in the manner of sodium-vapor salt ÍÎ-ÑÍ2-ÑÍ2-ÑÍ2-ÑÎÎNa (γ –hydroxybutirate of sodium) as ñíàòâîðíîå facility, as well as in àíåñòåçèîëîãèè as íåèíãàëÿöèîííîãî facility at operation.

Polyhydric hydroxi acids. The polyheterofunctional compounds has important importance. Polyhydric hydroxyl acids play the greater role in biochemical process. The most widely known are apple, lemon and wine acids.

Apple and lemon acid take part in cycle thricarboxylic acids, named also by cycle of Krebs - an universal stage oxidated catabolism of carbohydrate, lipides and other compounds in whitness of oxygen.

 

Laboratory work

The qualitative reactions of hydroxi – and ocsoacids

 

1. The Determination two carboxyl groups in wine acid.

 

In test tube add 1 drop 15% of the solution of the wine acid, 2 dripped 5% of the solution potassium hydroxide and joggle. In this is gradually formed difficult soluble white crystalline sediment to potassium salt of wine acid (potassium hydrotartrate). Unless it is formed sediment, then test tube it is necessary to keep under stream water, cool and grind the wall of the test tube by glass stick. In test tube else add 4-5 drops of the solution potassium hydroxide. The crystalline sediment opens, is since formed well soluble in water potassium tartrate. Save the solution potassium tartrate on the following experiences.

 

2. The Determination hydroxyl groups in wine acid.

 

In two test tubes on two drops flow the solutions 2% sulphate honeys (II), 10% of the solution sodium hydroxide. It is formed sediment of honeys (II) hydroxide of the blue colour. In the first test tube fill the solution potassium tartrate (received in previous experience). At the sediment opens and form the solution with blue colouration. The test tubes with contain warm before boiling. In the first test tube is not changed colouration of the solution, in secondly is formed oxides (I) honeys. The educated solution blue colour name is the Fehling’s reagent.

 

Exercises

1. What compounds are formed when heating a-hydroxy acid:

A) lactyd

B) lactam

C) ketone

D) aldehyde

E) ocsiacid

2. Furacilin is synthesized thereof material:

A) furan

B) tetrahydrofuran

C) furfurol

D) Bromfuran

E) nitrofuran

3. Compounds, containing in molecule simultaneously hydroxyl and carboxyl groups, is identified:

A) hydroxiacids

B) aminoalcohols

C) alcohols

D) carboxylic acids

E) ocsoacids

4. At decomposition α – hydroxiacid in whitness of mineral acids, is formed:

           

        R     OH        t0 H+

                   C

            R             COOH

 

A) acetic acid and aldehyde

B) formic acid and carbonyl compounds

C) carboxylic acids

D) ketone

E) aldehyde acids

5. What way gets acetoacetic esters from ethylacetate:

But) by reduction by amalgam of the zinc

B) Fridelya-Krafts reaction

C) ester condensation of Klyayzen

D) reaction of wiurtz

E) Kannicaro condensation

6. What reaction is called the ketone fission of esters of ocsiacids?

A) Acid hydrolysis esters b- an ketoacid and the following their decarboxylation on heating;

B) Hydrolysis b- an ketoesters in whitness of N+ or OH-

C) decomposition of ketones on heating;

D) aldol - croton condensation of ketones;

E) oxidation of ketones in mixture carboxylic acids

7. Keto – enol tautomerism is a quotient by event:

A) protonotrops;

B) aldol - croton condensation;

C) optical isomerism;

D) isomers positions of the multiple bonds;

E) geometric isomers

8. What reagent pirogrape acid interacts on carboxyl group?

A) NaHCO3 (H2O);

B) C6N5NHNH2;

C) NaHSO3;

D) HCN;

E) C6N5COCl

9. In chemical conversions acetoacetic esters, as a rule takes part:

A) ketone and ånol forms

B) only ketone form

C) only ånol form

D) only Z,Z - a deskside ånol forms

D) only E,E - a deskside ånol forms

10. Choose the correct name to following reaction:

ÑÍ3– Ñ–ÑÍ2–Ñ–ÎÑ2Í5+NaOH             

 Î              Î

® 2CH3COONa + Ñ2Í5OH

 

A) acid fission acetoacetic esters;

B) hydrolysis ester group;

C) alcohol fission acetoacetic esters;

D) ketone fission acetoacetic fission;

E) reaction of saltformation

 

AMINO ACIDS

 

Amino acids are the derivatives of carboxylic acids in which an a-, /3-, 7-, etc. hydrogen has been replaced by an amino (—NH2) group. The simplest amino acid is amino acetic acid which is commonly known as glycine.

H2NCH2COOH Glycine,

Thus, amino acids are bifunctional compounds. However, the number of either functional group may be more than the other. The amino acids having more amino groups than carboxyl groups are called basic amino acids, and those having more carboxyl groups than amino groups are called acidic amino acids.

Amino acids are the structural units of proteins which are one of the three basic classes of foods; the other two are carbohydrates and fats. Proteins occur in most cells of the animal body; they also occur in plants. When hydrolysed, proteins yield a mixture of amino acids which are usually called the protein-forming or proteinaceous amino acids. The number of different proteinaceous amino acids obtained from nearly all proteins is about twenty.

They differ from each other in the nature of the side chain (R) attached to the a-carbon atom. Except for glycine ail the a-amino acids are chiral, and it has been found that all the naturally occurring a-amino acids belong to the L family of optical isomers, and have the S configuration at the a-carbon atom. iO

In proteins, the individual amino acids are joined by amide linkages, known as peptide bonds, as shown below:

The size, shape, and function of a protein is determined by the nature and the number of the amino acids present, and the order in which they are joined together, in the protein molecule. Obviously, there are infinite number of possibilities. A single protein molecule may contain even thousands of amino acid units.

Proteins that provide all the essential amino acids in about the proper proportion for human nutrition, are called complete proteins, e.g., those in meat, fish, egg and milk. Proteins that are deficient in one or more of the essential amino acids, are called incomplete proteins. Plant proteins are generally incomplete. For example, wheat, rice and corn are all deficient in lysine. Rice is also deficient in threonine, and corn is also deficient in tryptophan. Beans, peas, and other legumes have the most complete proteins among the common plants, but they are deficient in methionine. Vegetarians can achieve an adequate intake of the essential amino acids if they eat foods from many different plants.

 

Physical Properties of Amino Acids    

 

Amino acids are non-volatile crystalline solids that melt at fairly high temperatures (generally above 200°C), usually with decomposition. Their melting points are much higher than those of the organic compounds of related structures and molecular weights. For example,

Amino acids are fairly soluble in water. They are also soluble in highly polar organic solvents, but are insoluble in non-polar solvents. They generally have large dipole moments (glycine, [l = 14 D).

These properties are typical of salts and indicate that the basic amino and the acidic carboxyl groups of the same molecule neutralize each other to form an inner salt which is also known as a dipolar ion or a zwitterion, as shown below:

 Acid-Base Properties of Amino Acids   

Amino acids are amphoteric, i.e., they show both acidic and basic properties. However, they are less acidic than most carboxylic acids, and are less basic than most

amines.

In aqueous solutions, an equilibrium exists between the dipolar ion and a cationic and an anionic form of an amino acid.

 

Laboratory work

Qualitative reactions of hydroxi- and ocsoacids

 

1. Biuret’s reaction of peptides bonds

 

In test tube fill the solution egg squirrel and in such amount add 10% of the solution sodium hydroxide and 1-2 drop on wall dripped the solution of the copper sulphate. Exists the appearance of the violet colouration.

 

2. Ksantoprotein’s reaction of squirrel

 

In test tube fill 10 drop of solution egg squirrel and 2 dripped the concentrated nitric acid. Joggling test tube carefully warmed. The solution and sediment gain yellow colouration. The test tube cool, and carefully add 2-3 dripped 10% of the solution of sodium hydroxide before appearance of the yellow colouration.

 

3. The reactions of the determination of sulphur containing -amino acids

 

10 drops of the solution egg squirrel fill in test tube and on volume 2 times more 10% of the solution of sodium hydroxide. The mixture mixes and warm before boiling. To got alkaline solution add 5 drops 10% of the solution of acetate of lead and once again boil. Exists the appearance black-sulphur setting.

 

Exercises

 

1.  Peptide hormone - an insulin consists of two peptide of circuits, they are with each other connected with two footbridges:

A) sulfide

B) hydrogen

C) oxygen

D) disulfide

E) nitrous

2. Compounds, consisting of the remainder peptide and squirrel name:

A) a-amino acid

B) of the squirrel

C) polysaccharides

D) nucleic acids

E) nitrogen basis

3. Compounds, containing simultaneously carboxyl and amino groups is called:

A) a -amino acid

B) of the squirrel

C) polysaccharides

D) nucleic acids

E) nitrogen basis.

4. On nomenclature IUPAC β -amino acid are:

A) 2 - amino acid

B) 1 - amino acid

C) 3 - amino acid

D) lactames

E) 2 - an amidoacides

5. At interaction of the ethyl ethers of acrylic acid with secondary alcohol is formed:

            ÑH2 = CHCOOC2H5 + R – NH – R →

 

A) ethyl esters of 2 - an aminopropionoic acid

B) ethyl esters of 3 – an aminopropionoic acid

C) amide acrylic acid

D) amide 2 - an aminopropionoic acid

E) amide àìèä 3 - an à aminopropionoic acid

6. What amino acid are formed at interaction α - an xinitriles with ammonia and following hydrolysis?

            R – CH – CN + NH3 → …… H2O. H+  ?

 

À) α – amino acids

B) β – amino acids

C) γ – amino acids

D) α–oxiamides of acid

E) α – aminoamides of acid

7. What amino acid is formed under catalytic reconstruction pyrogrape acids in whitness of ammonia?

A) alanine  

B) leucine

C) β – aminopropanoic acid

D) picolinic acid

E) aminobenzoic acid

8. When heating a - an aminopropanoic (H2NCH2CH2COOH) acid is formed?

A) acrylic acid

B) àmode of acrylic acid

C) polyamides

D) amide of metaacrylic acid

E) nothing do not occur

9. At accompaniment of the salts Ñu (²²) to water solution a - amino acid appears blue colorated, conditioned:

A) by formation of intermolecular complex salts

B) by formation of inwardlymolecular complex salts

C) by formation of akwacomplex

D) by formation of saltocomplex

E) by formation of mixture products

10. When heating a - amino acid are formed:

A) lactames

B) polyamides

C) unsaturated acids

D) complex compounds

E) nothing be not formed

 

Carbohydrates. Monosaccharides and disaccharides

 

The carbohydrates are an important group of naturally occurring organic compounds. They are extremely widespread in plants, comprising upto 80% of their dry weight. The most familiar carbohydrates are glucose, starch, and cellulose. Glucose is formed in the plants by the combination of carbon dioxide and water under the catalytic effect of chlorophyll, the green colouring matter. The energy required for this process is supplied in the form of sunlight, and die process is called photosynthesis.

Thousands of glucose molecules combine together to form a much larger molecule of starch which is then stored in grains (or seeds) to serve as our food (or for new plants). Glucose molecules can also combine in a somewhat, different way to form, another large molecule of cellulose that constitutes the chief structural material of plants. When eaten by animals, the starch or cellulose is broken down into the original glucose units which are carried by the bloodstream to the liver where they recombine to form glycogen (also known as animal starch). Glycogen can be broken down once more into glucose, when required. Glucose is also carried by the bloodstream to the tissues where it is oxidized ultimately to carbon dioxide and water with the release of energy that was originally supplied as sunlight.  

Glucose thus provides the storehouse for energy derived from the sun through photosynthesis. Some of the glucose is converted into fats, whereas some reacts with nitrogenous compounds to form aminoacids. Condensation of the aminoacids results in the formation of proteins (meat) that constitute a large part of the animal body. In fact, the carbohydrates provide us with all the basic necessities of life. We use starch, in the form of wheat, rice, potatoes, peas, corn, beans, etc., as our foodstuff; we use cellulose, in the form of cotton, linen, rayon, etc., for our clothing, and, in the form of wood, for our houses. Paper, another form of cellulose, is an essential requirement of the modern civilization.

The name carbohydrate is derived from the fact that the molecular formula of almost all the compounds belonging to this group of natural products can be expressed by a general formula Cx(H2O)y, i.e., they appear to be "hydrates of carbon". However there are certain compounds that are carbohydrates in their chemical nature but do not conform to this general formula; 2-deoxyribose, e.g., has molecular formula C5Hi0O4. On the other hand, certain compounds like formaldehyde (CH2O) and acetic acid (C2H4O2)S conform to this formula but are not carbohydrates. Although these exceptions revealed that this simple-minded view was erroneous, the term carbohydrate has persisted. However, it is now commonly used to represent the compounds that are optically active polyhydroxy aldehydes and ketones, or the substances that on hydrolysis yield these compounds.

Classification of Carbohydrates

Sugars, also called saccharides, are the simplest carbohydrates, and provide the basic structural units for most of the high molecular weight carbohydrates. The higher carbohydrates can be hydrolysed to simple sugars, but most of the sugars cannot be hydrolysed further. This forms the basis for the classification of carbohydrates. Thus, a carbohydrate that cannot be hydrolysed to simpler carbohydrates is called a monosaccharide, e.g., glucose or fructose. A carbohydrate that can be hydrolysed to two monosaccharide molecules is called a disaccharide, e.g., maltose or sucrose, and a carbohydrate consisting of three monosaccharide units is called trisaccharide, and so on. In general, the carbohydrates that yield 2 to 10 monosaccharide molecules on hydrolysis, are called oligosaccharides, and those yielding more than ten molecules of monosaccharides are called polysaccharides. The natural polysaccharides generally consist of 100-3000 monosaccharide units.

Since the whole group of carbohydrates is related to monosaccharides, the chemistry of the monosaccharides will be applicable to all the carbohydrates.

 

MONOSACCHARIDES

Nomenclature of Monosaccharides.

The names of the sugars (saccharides) mostly end in -ose, e.g., glucose, fructose, etc. This has been made the basis for naming the monosaccharides. Thus, a monosaccharide containing an aldehyde group is called an aldose and that containing a keto group is called a ketose. The monosaccharides are also characterized in terms of the number of carbon atoms present in the chain. For example, a monosaccharide with three carbon atoms is known as a triose, that with four carbons is known as a tetrose, with five a pentose, with, six a hexose, and so on. Usually, both these characterizations are combined together while naming a monosaccharide, Thus, glucose is an aldohexose, and fructose is a ketohexose. Monosaccharides generally contain 3-9 carbon atoms, but most of the naturally occurring monosaccharides are pentoses or hexoses.

Configuration of Monosaccharides

The monosaccharides are generally represented by Fischer projections (p. 186) which are drawn as vertical carbon chains widi the carbonyl group closest to the top, and the numbering is started from the top. These are then classified as D or L, depending on whether the configuration of the chiral carbon atom closest to the bottom of the vertical chain (highest-numbered) is similar to that of D- or L-glyceraldehyde, respectively. Glyceraldehyde, an aldotriose, is the simplest monosaccharide. Since it contains only one chiral carbon atom, it has only two optical isomers which are enantiomers. Their absolute configurations are known. The configuration of the dextrorotatory enantiomer is designated as D and is given below in Fischer projection (1), whereas the configuration of the levorotatory enantiomer is designated as L (2).

As we already know, a compound with n chiral carbon atoms has 2" possible optical isomers. Thus, there are 2 aldotrioses, 4 aldotetroses, 8 aldopentoses, 16 aldohexoses, and so on. Half of the optical isomers in each case would belong to the D series and half to the L series. It may be mentioned that only one enantiomer of each pair is found in nature, and that generally belongs to the D series. The aldoses with upto six carbon atoms belonging to the D series are given on p. 586. Their relationship with D-glyceraldehyde is also shown.

 

Laboratory work

The qualitative reactions of Carbohydrates.

 

1. The determination of hydroxyl groups in molecule of D-glucose

 

In test tube fill 1 drop 0,5%-íîãî of the solution Ä-ãëþêîçû and 6 drops 10%-íîãî of the solution of sodium hydroxide. On formed mixture add 1 drop 2% of the solution of the sulphate of copper (II). The educated sediment of copper (II) hydroxide quickly opens and is formed transparent solution of the blue colour. Save the received solution on the following experiences.

 

2. Reduction copper (II) hydroxide in alkaline solution with glucose (the test of Trommer).

To getting solution in previous experience add before 18-20 mms distilled water. Keeping test tube twist; warm the higher part of the test tube before boiling. The higher part of the solution when heating moves over to orange colour. This reaction is called Trommer’s test and is used for determination contents glucoses in urines.

 

3. Reduction of ammonium solution of silver hydroxide with glucose.

In test tube flow 1 drop 1% of the solution of the silver nitrate and there add 2 dripped 10% of the solution of sodium hydroxide and on formed sediment add 3-4 dripped 10% of the solution of ammonium hydroxide. This reagent is identified of Tollen’s reagent.

To getting solution add 1 drop 0,5% of the solution of glucose and warm to thickening of the solution. Then reaction conducts without heating, and is formed metallic silver in the manner of black setting or on wall of the test tube in the manner of briliance (the reaction of silver’s mirror).

 

Exercises

 

1. The remainder of the glucose in molecule of the cellulose are bound:

A) b - an glycosidic linkade

B) a - an glycosidic linkade

C) j - an glycosidic linkade

D) s - an glycosidic linkade

E) d- an glycosidic linkade

2. The lactose does not show the reduction characteristic since in his(its) molecule contains:

A) glycosidic carboxyl group

B) asymmetric atom carbon

C) several hydroxyl groups

D) is absent glycosidic carboxyl group

E) carboxyl group

3. The sucrose does not show the reduction characteristic since in his(its) molecule:

A) is absent glycosidic carboxyl group

B) contains glycosidic carboxyl group

C) contains the asymmetric atom of carbon

D) contains several hydroxyl groups

E) contains carboxyl group

4. The number of possible stereoisomers of glucoses:

A) 16

B) 8

C) 12

D) 14

E) 6

5. Indicate the reaction an milkacidic fermentations of the glucose:

À) Ñ6Í12Î6 ® 2ÑÍ3 –ÑÍÎÍ – ÑÎÎÍ

B) Ñ6Í12Î6 + 6Î2 ® 6ÑÎ2 + 6Í2Î

C) Ñ6Í12Î6  ® 2Ñ2Í5ÎÍ + 2ÑÎ2­

D) Ñ6Í12Î6  ® ÑÍ3ÑÍ2ÑÍ2ÑÎÎÍ + 2ÑÎ2­ + 2Í2­

E) 6ÑÎ2 +6Í2Π  w  Ñ6Í12Î6 – 6Î2

6. Indicate the reaction of the alcohol fermentation of the glucose:

À) Ñ6Í12Î6  ® 2Ñ2Í5ÎÍ + 2ÑÎ2­

B) Ñ6Í12Î6 + 6Î2 ® 6ÑÎ2 + 6Í2Î

C) Ñ6Í12Î6 ® 2ÑÍ3 –ÑÍÎÍ – ÑÎÎÍ

D) Ñ6Í12Î6®ÑÍ3ÑÍ2ÑÍ2ÑÎÎÍ+2ÑÎ2­+ 2Í2­

E) 6ÑÎ2 +6Í2Π  w  Ñ6Í12Î6 + 6Î2

7. Indicate the reaction an oilacidic fermentations of the glucose:

À) Ñ6Í12Î6 ®ÑÍ3ÑÍ2ÑÍ2ÑÎÎÍ+2ÑÎ2­+ 2Í2­

B) Ñ6Í12Î6  ® 2Ñ2Í5ÎÍ + 2ÑÎ2­

C) Ñ6Í12Î6 ® 2ÑÍ3 –ÑÍÎÍ – ÑÎÎÍ

D) Ñ6Í12Î6 + 6Î2 ® 6ÑÎ2 + 6Í2Î

E) 6ÑÎ2 +6Í2Π  w  Ñ6Í12Î6 – 6Î2

8. Natural disaccharides consists of the remainder two monosaccharides and these remainder are bound between itself:

A) glycosidic linkage

B) hydrogen linkage

C) peptide linkage

D) covalent linkage

E) ionic linkage

9. The starch and cellulose pertains:

A) polysaccharides

B) disaccharides

C) trisaccharides

D) monosaccharides

E) tetrasaccharides

 

Literature

 

1.  Crews, P. Organic structure analysis. 1998, 547 p.

2. Loudon, G. Marc. Organic chemistry. CD-ROM. New work, Oxford, 2002, 1353 p.

3. Younas M. A textbook of organic chemistry // Ph.D. (Cambridge). University of the Punjab, Lahore (Pakistan), ILMI KITAB KHAIMA, KABIR STREET, URDU BAZAR, LAHORE

4. Berezin B.D., Berezin D.B. The Course to modern organic chemistry. -M.: High school, 2001

5. Shabarov YU.S. Organic chemistry. -M.: Chemistry, 2000, T.1,2

6. Artemenko A.I. The Organic chemistry. Theoretical bases. The Deep course. 2-e izd. -M.: Enlightenment, 2001

7. Roberts Dzh., Kasserio M. Bases to organic chemistry. In 2 t. -M.: World, 1978, T.1,2

8. Terney A. Modern organic chemistry. In 2 t., -M.: World, 1981, T.1,2

9. Neyland O.YA. Organic chemistry.- M.: High school, 1990, 750ñ.

10. The Practical work on organic chemistry. / Ginzburga O.F. and Petrova A.A. -M.: High school, 1983,

11. Reutov O.A., Kurc A.L., Butin K.P. Organic chemistry.-M.: Chemistry, 1981, T.1,2

12. March Dzh. The Organic chemistry. M.: World, 1985, T.1-4